Windsor

CT

06095

United States

The Battery Simulator 1200 is a 12-cell simulator that is the building block of many of Bloomy’s BMS test platforms. Each cell is individually programmable to sink and source current at 0-5VDC. It is analogous to a battery module, except it is not susceptible to the hazards of real batteries. Since it is isolated to 1,000 Volts, you can combine multiple 12-cell simulators in series in order to simulate a larger pack. It is a commercial off-the-shelf product that is FCC and CE certified and available for international export.

Exton

PA

19341

United States

Battery Pack Assembly: For over 30 years Cell-Con has designed and built custom battery packs for the OEM market including Medical, Military, and Industrial applications.
Battery Chargers: Over 100 stocked battery chargers, many of which are UL-60601 approved for the medical industry.

Livermore

CA

94551

United States

High Energy Density 3V supercapacitors from 50F to 5000F.

Hunt Valley

Maryland

21031

United States

The BatteryDAQ Sentry line of continuous battery monitoring systems provide state of health measurements for UPS/Data Center, Telecom, Utility and alternative power applications.

BatteryDAQ has solutions for effectively managing from 1 to 1 million sites.

The Sentry line of battery monitors are sleek, robust, easy to install, easy to understand, and easy on the budget!

Irvine

CA

92614

United States

The Two Quadrant Regenerative Source and Sink DCB Series power supplies from Adaptive Power Systems are powerful yet cost effective Battery test solutions. Designed using state-of-the-art Digital Signal Processing, these units combine a DC power supply with a regenerative electronic DC load into a single unit. All DCB Series models support an auto-ranging constant power V-I output profile that offers both higher voltage and high current from a single unit.
Available in three power levels of 5kW , 10kW or 15kW, there are seven voltage range models up to 1500Vdc and max. current per 3U chassis of 360Adc. Available with 380 ~ 480 Vac three phase AC input. Master/ Slave mode for series or parallel operation available for higher voltage and or power requirements.

Baar

6340

Switzerland

LITRONIK an MST company, is manufacturing primary batteries for active implants with very high volumetric energy and power densities, low self-discharge rates and high operating safety.
The electrochemical systems behind the LITRONIK primary batteries are based on lithium-iodine and lithium-manganese dioxide, and they cover three performance ranges for different active implants:
> high energy batteries with lithium-iodine technology for implantable pulse generators, e.g. pacemakers
> medium rate batteries with lithium-manganese dioxide technology for implants that require mid-range pulse power, e.g. pacemakers with telemetry functions
> high power batteries with lithium-manganese dioxide technology for implants that require the highest pulse power, e.g. defibrillators

Bartlett

IL

60103

United States

Herrmann Ultrasonics is a machine and system supplier that offers optimized solutions for ultrasonic welding used in the production of lithium-ion batteries, battery components, and other industrial applications. Our unique stack mount allows for faster tooling alignment, and repeatable change overs, resulting in greater production up time. Our ultrasonic welding systems meet the highest standards for weld quality and comply with today’s requirements for process monitoring, quality assurance, and data acquisition. Application-specific technical consulting is provided in our ultrasonic laboratories.

Richmond

BC

V6W 1J6

Canada

The Cadex C7000 Series of battery analyzers service lithium, nickel, and lead acid batteries on the same device with a simple change of adapter. Simply slide the battery into one of the 3,200 custom Battery Adapters or chose from one of 4 Universal Adapters and discover why the C7000 Series Battery Analyzers have become the world’s leading battery analyzers.

With features such as Boost to awaken sleeping Li-ion batteries and custom programs to prepare Li-ion for shipment, the C7000 analyzers masters battery testing to its fullest. Use the analyzer to measure capacity, spot check spare capacity after a long day and apply calibration to improve fuel gauge readings.

West Chester

PA

19380

United States

Battery & capacitor manufacturers rely on Sonobond’s Ultrasonic SonoWeld® 1600 and Dual Head Spot Welders to join up to 100 layers of foil as thin as seven microns without tearing. Our units weld foil-to-foil, -tabs & -terminals, battery pouches and HV terminations.

These welders, made in the USA, are used in the assembly of rechargeable batteries for all-electric & hybrid automobiles, and for the backup storage batteries needed in alternative energy systems like wind and solar.

Precise, dependable, solid-state and highly conductive welds are assured with our unique, patented Wedge-Reed Bonding System. Sonobond holds more than 150 patents, including the first for ultrasonic metal welding issued in 1960. Visit our website to order FREE SAMPLE WELDS made with your specific materials.

West Chester

PA

19380

United States

Leading battery & capacitor manufacturers rely on Sonobond’s ultrasonic metal welders to produce precise, environmentally-friendly, high performance foil-to-foil, -tab and -terminal welds; battery pouches & HV terminations. They’re ideal for Lithium-Ion, Ni-CD and Ni-MH battery assembly.

Sonobond invented ultrasonic metal welding in 1960, and our welders, made in the USA, use our patented Wedge-Reed System, which is essential for producing strong, solid-state, highly conductive welds without metallurgical defects. We also developed the first ultrasonic welder to join up to 100 layers of copper or aluminum foils as thin as seven microns, and in just one pulse.

We offer no cost/no obligation sample welds made with your specific materials so you can see the results before you buy.

Mississauga

Ontario

L4W 2M4

Canada

Panisolar commercializes rechargeable nickel-zinc batteries, zinc-air fuel cells, and the production of nickel hydroxide. The company offers conventional and wall mounted batteries. The batteries include replaceable zinc cartridges.

SHENZHEN

Guangdong

518109

China

Over 10 years experiense in lithium polymer battery design and manufacturing, can offer high quality standard and custom lipo battery cells, packs for global market.As a leading lithium battery manufacturer,PADRE has ability to produce full series of lithium polymer batteries.The voltage covers 3.7v,7.4v,11.1v,14.8v and higher voltage,capacity from 5mAh to 50000mAh. Battery shapes covers curved battery,ultra thin battery,ultra narrow battery,ultra small battery,round button battery,cylindrical battery,moon shape battery.By operating temperature, the types cover high temperature +80degrees,low temperature -40degrees.By discharge rate,it covers 2C,10C,20C,30C,40C,50C,60C,70C.Most clients can get what they need from PADRE.